Lectrotab

Ashland,  VA 
United States
http://www.lectrotab.com
  • Booth: 652

Lectrotab designs and manufactures premium quality electromechanical trim tab systems, Sentry battery chargers for the leisure and commercial marine markets and Trollbuddy trolling systems. The Lectrotab system is easy to install on new boats or to replace existing trim tab systems. Lectrotab actuators are covered by a worldwide lifetime warranty.

Lectrotab is excited to introduce a new product line called Trollbuddy. The Trollbuddy system, consisting of a linear actuator, microprocessor control option, and aluminum plate assembly, adjusts trolling speeds on both outboard and inboard/outboard motors to maintain optimal trolling speed.

All standard and custom trim tabs are available in stainless steel (standard, mirror or powder-coated finish) or marine-grade aluminum alloy.

Lectrotab is located in Ashland, VA and distributes its products worldwide.

Brands: Lectrotab Sentry Trollbuddy


 Products

  • Automatic Leveling Control
    The Automatic Leveling Control (ALC) corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. The ALC is easily upgraded to most brand trim tab systems....

  • As wind shifts, water conditions change or passengers move about, the Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride and improved fuel economy.

    Listed are additional features of the ALC control:

    • Microprocessor based automatic leveling trim tab control with LED tab position indicators

    • Controls roll and pitch automatically

    • Easy upgrade to many brand trim tab systems

    • Internal GPS does not require a connection to a GPS antenna or network

    • Automatically adapts to varying sea conditions

    • Completely sealed, completely waterproof (IP68) and will not deteriorate in sunlight
    • Prevents automatic corrections while turning

    • Designed for planing and semi displacement hulls larger than 20 feet

    • Actuators connect directly to ALC-1 display panel (no external power module box required)

    • Automatically dims LED tab position indicators in darkness and brightens in sunlight

    • Automatically retracts trim tabs when boat is off plane or using optional key switch connection

    • Dual station operation available (ALC-1D and ALC-2D does require external power module)

    • Operates on 10 to 30 Volts DC

    • 2 Year Warranty

    • CE Approved (Compliance with EMC regulations)

  • Sentry FR Series Marine Battery Chargers
    The line of Sentry FR chargers is in an elite class, setting the standard for dependable battery chargers. Available in 12, 24, and 32vdc....

  • The line of Sentry FR chargers is in an elite class, setting the standard for dependable battery chargers. Sentry chargers are designed to operate for decades in the harsh marine environment. They are completely field serviceable and come with a 2-year parts and labor warranty. Sentry FR battery chargers are designed for fullyautomatic, unattended operation. Once batteries reach full charge, Sentry chargers turn off completely.  There is no output trickle to overcharge or dehydrate batteries. Standard Sentry chargers have negative ground with triple output, allowing three separate banks of batteries to be charged simultaneously. A fourth output is available on some models. For long voyages, Sentry FR is the charger to have aboard. The manual/automatic switch allows you to bypass the voltage regulating circuit, and most repairs can be accomplished with just a few spare parts. Front-panel controls and indicators include an ammeter, manual/automatic selector switch, full-charge and “on” indicator lights. All models are current limited and ignition protected for engine room installations.

    • Chargers available in 12, 24 and 32vdc

    • Full cutoff when full charge reached - no “trickle” charge

    • No boiling or dehydration

    • Ignition protected

    • Three bankcharging (4 bank available on request on 60 amp models)

    • Quiet operation

    • Current limiting protection

    • Drip proof cabinet

    • AC fuse protection

    • Automatic reset DC Breaker

    • Reliable ferro-resonant technology

    • Field repairable

    • Two year parts and labor warranty

  • Sentry Voyager Marine Battery Chargers
    Sentry Voyager Elite marine battery chargers are heavy duty and extremely reliable. Each charger is designed with a switch to select the correct charging curve for your battery type. The chargers automatically switches 115/230vac and 50/60Hz....

  • The line of Sentry Voyager marine battery chargers are light weight, compact and easy to install. Its circuit board is conformal coated for added protection from the harsh marine environment.

    Sentry Voyager battery chargers are designed with dip switches to select the correct battery charging curve. Battery charge selections are Lead-Acid, AGM, Gel, Lead Calcium, Spiralcell or Lithium-ion (LiFeS04). Each charger will charge three independent and isolated battery banks. The Voyager series charger is a direct replacement for the Sentry “SM” series battery charger. Please refer to the specification sheet for dimensional details.

    The charger is designed to automatically switch to match 115vac or 230vac incoming power and 50Hz or 60Hz frequency. Equipped with an LED indicator, Voyager chargers display charging status of Boost, Equalization and float modes. The LED indicator will also show fault status of high temperature fault, battery fuse fault and output voltage fault. All Sentry Voyager chargers come with a 2 year parts warranty from date of manufacture.

    • Selectable charging outputs for Lead-Acid, AGM, Gel, Lead Calcium, Spiralcell or Lithium-ion (LiFeS04)
    • Automatically switches to 115vac or 230vac and 50Hz or 60Hz power
    • Three isolated bank charging outputs
    • Lightweight and compact size
    • “Night Mode” button for silent operation
    • AC and DC fuse protection
    • Automatic weekly equalization
    • Conformal coated PC Board for corrosion protection
    • Direct replacement for Sentry “SM” series chargers
    • LED charge mode and fault status indicator
    • Two year parts warranty
  • Sentry Voyager Elite Marine Battery Chargers
    Sentry Voyager Elite marine battery chargers are heavy duty and extremely reliable. Each charger is designed with a rotary switch to select the correct charging curve for your battery type and automatically switch to 115/230vac and 50/60Hz....

  • The line of Sentry Voyager Elite marine battery chargers are heavy duty and extremely reliable. Each charger comes equipped with a CAN BUS J1939 interface which can be connected to any monitoring system. The circuit board is conformal coated for added protection from the harsh marine environment.

    Sentry Voyager Elite battery chargers are designed with a rotary switch to select the correct charging curve for your batteries. The battery charge selections are Lead-Acid, AGM, Gel, Lead Calcium, Spiralcell, Lithium-ion (LiFeS04) and Winter Storage Mode. Each charger will charge three independent and isolated battery banks. A battery temperature sensor is included to prevent overcharging batteries in a high ambient temperature.

    The Voyager Elite series charger is a direct replacement for the Sentry “SM” series battery charger. Please refer to the specification sheet for dimensional details.

    The charger is designed to automatically switch to match 115vac or 230vac incoming power and 50Hz or 60Hz frequency.

    The easy to read display shows charging status of Boost, Equalization or Absorption and Float modes. The display will also show fault status of high temperature fault, battery fuse fault and output voltage fault.

    All Sentry Voyager Elite chargers come with a 2 year parts warranty from date of manufacture.

    • Selectable charging outputs for Open Lead-Acid, Sealed Lead-Acid, AGM, Gel, Lead Calcium, Spiralcell, Lithium-ion (LiFeS04) batteries and Winter Storage Mode

    • Easy to read LED display showing charge modes and fault status

    • Automatically switches to 115vac or 230vac and 50Hz or 60Hz power

    • Three isolated bank charging outputs

    • Lightweight and compact size

    • Battery temperature sensor to prevent overcharging

    • AC and DC fuse protection

    • CAN BUS J1939 interface to connect to any monitoring system

    • Conformal coated PC Board for corrosion protection

    • Direct replacement for Sentry “SM” series chargers

    • Two year parts warranty

  • Trollbuddy trolling system
    The Trollbuddy system, consisting of a linear actuator, microprocessor control option, and aluminum plate assembly, adjusts trolling speeds on both outboard and inboard/outboard motors to maintain optimal trolling speed.
    ...

  • The Trollbuddy system, consisting of a linear actuator, microprocessor control option, and aluminum plate assembly, adjusts trolling speeds on both outboard and inboard/outboard motors to maintain optimal trolling speed. 

    Trolling speed can be easily adjusted with the control switch, allowing the engine to maintain the correct idle rpm while slowing the boat until the proper trolling speed is achieved.

    Using the Trollbuddy system eliminates the added weight, expense and maintenance costs of a “kicker” motor or trolling motor and batteries.

    • Adjusts and locks-in trolling speed,  while maintaining specified engine idle rpm

    • Eliminates added weight and expense of “kicker” motor or trolling motor and batteries

    • Automatically  retracts plates with speeds greater than trolling speed with LED control

    • Features quick-connect pins and plug for easy removal

    • Available in both removable clamp-style assembly and permanently mounted

    • Designed for outdrives/outboards 20 HP and larger

    • Includes control keypad with LED indicators to show plate angle available

    • LED keypad completely sealed, waterproof (IP68) and UV resistant

    • Automatically dims LED plate position indicators in darkness and brightens in sunlight

    • Manually operated rocker control switch option

    • Operates on 12 Volts DC (Optional 24 Volts DC available)

    • 1 Year Warranty

    • CE Approved (Compliance with EMC regulations)

  • Lectrotab trim tab systems
    Lectrotab designs and manufactures premium quality electromechanical trim tab systems for the leisure and commercial marine markets. The Lectrotab system is easy to install on new boats or to replace existing trim tabs....

  • Lectrotab trim tab systems are designed, developed and manufactured in Ashland, VA under Linear Devices Corp. Lectrotab has been in business since 1997. The Lectrotab system consists of an electromechanical linear actutaor that is covered by a limited lifetime warranty, stainless steel or aluminum tab plates and many control options.

    The tab plates are available in stainless steel (standard finish, mirror finish or black powder coated) or aluminum and can be custom designed to fit any specific requirements.

    The trim tab controls are available as a standard rocker switch (most economical) to an automatic leveling control.

    Please visit our website at www.lectrotab.com to view all the trim tab parts or kit options. There is also information about tab sizing.


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For Technical Support with this webpage, please contact support.