The ME-OMTT is designed to be a great asset for easier testing of outboards. In order to eliminate the need to constantly pick up and move outboards from stand to test tank and back, our tank is designed so the legs of the ME-140 or ME-110 follow channels under the test tank. To use, rotate the motor up into the lock position, roll the stand into the test tank brackets and pin them into place, then rotate the outboard back down into the run position while on the stand. As an example, we have tested a 15 hp motor full throttle in the forward position. You can see that test on You Tube. Larger outboards may not be able to run at full throttle in this tank. Our test tank and stands are designed to work together so that while an outboard is mounted on the stand it never needs to be removed throughout maintenance and testing, saving time and contributing to safety.
The test tank is able to be picked up with a fork truck, while full of water, and moved wherever you need. The entire unit is hot dip galvanized for greater protection from different environments. The test tank comes with a drain plug, 2 rubber coated brackets, and 2 pins with wire locks.
We have also designed the test tank so that you may, if you wish, add a 34" long 2"x8" board into channels welded inside in order to use the tank without having one of our stands.