* Encapsulated magnet for marine use.

* Marine-grade stainless steel thin wall construction.

* Superior in preventing rust.

* Holder an be adjusted and rotated to desired angle and height (adjustable to one full inch).

* Contemporary design.

* Sold as set.

* Screw size #8.

Patented

* Larger handle opening for comfortable grip.

* Anti-rattle design incorporates double springs and nylon slide to ensure quiet operation, even underway.

* Adjustable slide accommodates minor adjustments following installation.

* Reversible backing plate for wide range of door thickness.

* Included gasket eliminates the need for caulking.

* PVD black finish is available upon request.

* #8 installation screws are included.

* Strike screw size M4 or #8(not included).

Patented

* Contemporary design.

* One hand operation.

* Door can be opened and locked by pushing the button and rotating the handle.

* Every 90 degree turn can secure the handle in position.

* Two strike options for out-swing or in-swing doors.

* Strike is designed to prevent handle surface from scratching.

* Works on both right and left hand transom doors.

Patented

* Anti-rattle design incorporates spring loaded handle to ensure quiet operation, even underway.

* Detent handle design ensures fixed positioning after a 90 degree turn.

* When handle is pressed down, pawl lifts to compress hatch, hence ideal for gasket hatches.

* Well suited for aluminum boats with an extra 3mm spacer under flange to isolate stainless steel from aluminum.

* #8 installation screws, watertight gasket and spacers are included.

* Clean and elegant appearance with snap-on SS316 cover to conceal installation fasteners.

* Angled barrel design mimics slam latches for worry free closing.

* Slide knob can be locked in position to keep latch opened.

* Stainless Steel slide works smoothly on nylon body.

* Spring-loaded slide ensures constant engagement and no rattle.

* Optional strikes available for various door configurations.

* Screw size M4 or #8.

Patented

* Special mechanism secures railing in place as lock nut is tightened and eliminates the need for set screws.

* Concealed fastener design for a more elegant appearance.

* Fits 1" outer diameter handrail.

* Washer and lock nut are included.

* Upgraded design incorporates stainless steel cast nut.

* High density marine-grade stainless steel ensures strength and prevents crevice corrosion.

* Thin wall construction to ensure maximum water flow.

* Machined inner finish reduces potential for residual debris.

* Watertight gasket is included.

* Heavy duty cast construction with strong holding power.

* Designed to fit various applications for a tight seal on any compartment lid.

* Off-center strike can be rotated to achieve desired catch tension.

* Stainless steel mechanism presents smooth and low profile appearance in the closed position.

* #0507878 complete with eye for padlock up to 6mm shackles.

* Includes an installation jig to ensure precise strike alignment.

* PVD black finish is available upon request.

* Self-closing latch designed for inconspicuous mounting.  Ideal for interior cabinets.

* Designed for installation on the outside of the application to maximize usable space within cabinets and compartments.

* Slots and off-center strike incorporated to facilitate minor adjustments following installation.

* POM strike works smoothly with the stainless steel latch and enables quiet operation.

* Built-in marking hole to ensure proper alignment of strike during installation.

* Screw size M4 or #8.

* Slide latch designed with open and closed detent.

* Smooth low effort slide design.

* Comfortable slide grip.

* Available with two srike options.

* PVD black finish is available upon request.

* Screw size for latch body M5 or #10.

* Screw size for strike M4 or #8.

* Piano-style hinge with constant torque throughout the entire range of motion.

* Holds door open at any desired angle without torque adjustment.

* Ideal for different sizes of doors like overhead door, baitwell lid, glove box, access door, interior door, anchor locker, electronic panel, hatch etc.

* Short mounting leaves to fit 1/2" door.

* Long mounting leaves to fit the radious of fiberglass door.

* Passed 10,000 times cycle test and lost less than 20% on torque; 20,000 times lost 25% or less only.

* Passed 500-hour salt-spray test.

* #6 R/H fasteners are required.

Patented

* Larger handle opening for comfortable grip.

* Detent handle design ensures fixed positioning after a 90 degree turn.

* Handle up position indicates head in use.  Unique design allows inside egress even if the handle is pushed accidentally to closed position.

* Loctite is required during installation of lever handle.

* #8 installation screws and 9mm spacer shim are included.

Patented

* Stainless steel 316 face provides an elegant appearance.

* Fits wide range of hull thickness.

Simply press the tube at both ends to complete installation.

* The narrowed flange profile provides lower water outlet for quicker drainage.

* One-way rubber flapper for discharge.

* Caulk is required under flanges and between tubes.

Patented

* Spoke type drain grate designed for maximum water flow.

* Stainless steel 316 grate screws into nylon body.

* Incorporates one way check ball to hold water back temporarily.

* #0603835: Twist locking grate design prevents displacement of the grate while underway.

* 3mm spacer shim is included.

* 60mm (2-3/8") installation hole is required.

* #0403830-G is sold separately.

Self-tensioning and free-standing system is easy to set up, take down and store.

It adapts well to a multitude of installation configurations.

Sockets can be installed at any desired position for more complete coverage in 

comparison to traditional systems.  

Highly cost-efficient in comparison to man industry standard systems.

* Act as a stop to prevent cabinet doors from sliding open.

* Hidden fastener design for clean appearance.

* Unique detent knob design allows fixed positioning after each 90 degree rotation.

* Screw hole slots incorporated to facilitate minor adjustments following installation.

* Minimum 3mm of door gap is required.

* Screw size M4 or #8 for latch.

* Screw size M3 or #6 for strike.