Carling Technologies  

Carling Technologies, Inc® switches are the most widely recognizable and used switch brand in the industry with unmatched quality and aesthetics. The HR-Series is a perimeter illuminated, IP68 sealed rocker switch, featuring a stylish, low profile actuator that is available in either two or three positions. These rocker switches have a variety of dependent and independent illumination options; momentary and maintained circuits; and up to two customizable laser-etched legends. 
The patented design supports the various illumination options and allows the switch to be rated up to 20 amps, eliminating the need for relays. Additionally, these low-profile rocker switches fit the industry standard cutout.

The AV/AVH-Series sealed switch product line features a sleek, stainless design with various LED illumination options. These single pole switches are available with momentary and maintained circuits with quick connect tab terminals for easy installation and daisy chaining. 

The AV-Series is rated up to 10.1 amps at 6 and 12VDC but can be outfitted with a circuit board for higher amperage performance. This combination is featured in the AVH-Series, which is rated up to 30 amps at 12VDC.

In addition to higher amperage ratings, the AVH-Series also features overload protection, thermal cut off, and reset-ability providing superior safety and performance capabilities. 

Moreover, the AVH-Series can be outfitted to become a navigation/anchor switch furthering the versatility of this product line.

Maretron’s MPower CLMD12 offers programmable multi-channel DC electronic load modules in a scalable configuration, each capable of switching up to 5, 10, or 12 Amps with a total current capacity of 75 Amps. Provides fast switching and low-loss solid state ON/OFF switches.

The CLMD12 connects directly to the NMEA 2000® network, allowing breakers to be turned on and off from a Maretron DSM-Series display or any device running Maretron N2KView® including Maretron’s TSM-Series multifunction displays and MBB-Series black boxes or smart phones/tablets running N2KView software. 

Maretron’s MPower CLMD16 offers programmable multi-channel DC electronic load modules in a scalable configuration, each capable of switching up to 12 or 25 Amps, with a total current capacity of 125 Amps. Provides fast switching and low-loss solid state ON/OFF switches.

The TSM810C is a dedicated 8” touchscreen display that includes Maretron’s N2KView® vessel monitoring & control software, allowing you to configure as many favorite screens as you want with exactly the information you want to see. Ruggedized for marine use, the unit’s solid-state disk drive is able to withstand the pounding associated with waves and dissipates only 10 watts, eliminating the need for noisy internal cooling fans. The TSM810C can be mounted outside given the high bright screen and waterproof front and includes 2 USB ports & an Ethernet port. 

Maretron’s DSM570 is a 5.7” high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. Its user-friendly, dedicated marine display offers custom screen configurations (numeric, gauge, bar or graph in single or multiple displays) and a five-key illuminated keypad. These multiple display options conserve mounting space and reduce overall system cost. The DSM570 features an alert/alarm package and electrical switching capability. Connects with any NMEA 2000® network.

Maretron’s 3rd generation Black Box is a dedicated processing unit that includes Maretron’s N2KView® vessel monitoring and control software. Unlike a PC, the MBB300C runs only N2KView® software making it extremely stable and dedicated to vessel monitoring and control. 

Ruggedized for marine use including a solid state disk drive to withstand the pounding associated with waves. Dissipates 10 watts - no need for internal cooling fans that are noisy and wear out causing electronics to overheat and fail. Connects to a monitor via VGA or HDMI connector. 

Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital interface. Data is then distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000® compatible display. 

The J2K100 only listens to the J1939 network and draws no power from it (power is derived from the NMEA 2000® interface). Connect to a Maretron universal display and GPS receiver to create a system capable of displaying gallons per hour/and or miles per gallon. 

A key component of Maretron's N2KView® vessel monitoring and control system, the DCM100 measures the voltage and current of any DC power source or load. All DC information can be viewed anywhere on the vessel using a compatible NMEA 2000® display.

Sophisticated circuitry and software algorithms monitor battery temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. DCM100 measures current by using an included Hall effect current sensor which conveniently simply slips over the wire.

Maretron's VDR100 is used to record messages transmitted from products interconnected on a NMEA 2000® network. Recorded data is used for performance analysis, vessel tracking, preventative maintenance, network diagnostics, warranty incident, and accident investigation-improving safety and reducing operating costs. Each message is stored using solid-state memory technology with simple data retrieval via a removable USB 16 Gbyte flash drive (supplied) to hold weeks or more of data. Engineered to IEC 60945 standards, data is safely protected in a compact waterproof housing. 

Maretron’s FPM100 Fluid Pressure Monitor adapts up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of applications including water pressures, oil pressures, hydraulic pressures, or system vacuum for detecting clogged filters. The FPM100 is a key component of Maretron's N2KView® vessel monitoring and control system.