Marine Town Inc.

- Larger handle opening for comfortable grip.
- Anti-rattle design incorporates double springs
  to ensure quiet operation.
- Reversible backing plate for wide range of door thickness.
-1-3/4" & 2": Adjustable slide accomodates minor adjustments
  following installation.
- Included gasket eliminates the need for caulking.

- Larger handle opening for comfortable grip.
- Anti-rattle design incorporates spring loaded handle
   to ensure quiet operation, even underway.
- Detent handle ensures positioning after a 90° turn.
- When handle is pressed down, pawl is lifted to compress hatch.
- Ideal for glove box, hatch, livewell lid and small storage areas.
- Smaller profile for a unified appearance with use of
   larger Grand Series latches.
- Heavy duty 3/8" pawl shaft.
- #8 installation screws and watertight gasket are included.
- Stainless steel 304 accessories are included.
- PVD finish is available upon request.

- Spring loaded, anti-rattle design.
- Larger handle opening for comfortable grip.
- Detent handle ensures positioning after a 90° turn.
- Ideal for gasketed hatches.
- #8 installation screws and watertight gasket are included.
- Stainless steel 304 accessories are included.

- One hand operation.
- Door can be opened and locked by pushing the button and
   rotating the handle.
- Every 90° turn can secure the handle in position.
- Works on both right and left hand transom doors.
- Three strike options for out-swing or in-swing doors.
- Strike is designed to prevent handle surface from scratching.
- Wide flush strike of 0407369-8 covers pre-drilled mounting hole.
- 0107366/7: Stainless steel 304 screws and plastic strike are included.

- Clean and elegant appearance with snap-on SS316 cover
   to conceal installation fasteners.
- Knob can be positioned to keep the door open.
- Stainless steel slide works smoothly on plastic body.
- Spring-loaded slide ensures constant engagement and no rattle.

- Clean and elegant appearance with snap-on SS316 cover
   to conceal installation fasteners.
- Angled barrel design mimics slam latches for worry free closing.
- Knob can be locked in position to keep latch open.
- Stainless steel slide works smoothly on plastic body.
- Spring-loaded slide ensures constant engagement and no rattle.
- Optional strikes available for various door configurations.
 

- Heavy duty cast construction with strong holding power.
- Designed to fit various applications for a tight seal on
   any compartment lid.
- Off-center strike can be rotated to achieve desired catch tension.
- 0607981/3: Slot hole incorporated in housing to facilitate minor
   adjustments following installation.
- Stainless steel mechanism presents smooth and low profile
   appearance in the closed position.
- Includes a PVC installation jig to ensure precise strike alignment.
- Stainless steel 304 accessories are included for locking type.

- Ideal for cup holder, cleat, rod holder, hatch gutter,
   deck and ice chest drain.
- The barbed internal rear rubber receptor allows quick fit-up.
- Simply push stainless steel outlet tube into the receptor
   for assembly. Drainage hose is then attached and
   hose clamped into place to create a strong and secure connection.

- Upgraded design incorporates stainless steel cast nut.
- Three face sizes with five barb options.
- High density marine-grade stainless steel ensures strength
   and prevents crevice corrosion.
- Thin wall construction to ensure maximum water flow.
- Machined inner finish reduces potential for residual debris.
- Watertight gasket and stainless steel 304 ground screw are included.

- Drip collar on the face prevents hull streaking.
- Three face sizes with five barb options.
- High density marine-grade stainless steel
   ensures strength and prevents crevice corrosion.
- Thin wall construction to ensure maximum water flow.
- Machined inner finish reduces potential for residual debris.
- Watertight gasket and stainless steel 304 ground screw
   are included.

- Stainless steel 316 flange provides deluxe appearance.
- Fits wide range of hull thickness.
- The narrowed flange allows water to drain out at a lower water level.
- Simply press the tube from both ends to complete installation.
- Caulk is required under flanges and between tubes.

 PATENTED 

- One-hand operation.
- Concealed fastener design for a clean appearance.
- Designed for fender hook, or storage hook for hats or towels.
- Spring loaded hook secures the line firmly.
- Customized logo on the surface of 0508587-8 is available
   upon request.
- Can be installed with machine or self-tapping screws.

 PATENTED 

SUNSHADE POLE
Fiberglass With Carbon Fiber & Stainless Steel 316
- Quality carbon fiber finish on each pole.
- Compatible with any customized canvas.

 PATENTED 

SUNSHADE SOCKET W/CAP
Stainless Steel 316
- Designed with a 15° angle to create self-tensioning of poles,
   ensuring secure installment.
- Anti-rattle design incorporates a rubber bushing under the
   cap hinge to ensure that the cap stays in the open or closed
   position underway.
- Cap is designed to prevent water flowing directly into the socket.
   However, this socket is not self-draining and must be maintained
   to prevent corrosion and rusting that may result from sitting water.
- Requires a 28mm (1-1/8") installation hole with a 15° angle.
- U-shaped backing plate is included.
- Stainless steel 304 spacer and locking nut are included.

 PATENTED 

SUNSHADE SOCKET STUD TYPE
Stainless Steel 316
- Designed with a 15° angle to create self-tensioning of poles,
   ensuring secure installment.
- Self-draining design incorporates a threaded barb for 1/2" draining hose.
- Included seal gasket eliminates the need for caulking.
- Wider backing cup distributes stress over a larger area when in use.
- 0506867: Small face with low profile, ideal for boats with narrow gunnels.
   Requires a 28mm (1-1/8") installation hole with a 15° angle and notch hole.
- 0806868: Wider flange provides better coverage of the installation hole.
   Requires a 35mm (1-3/8") installation hole and notch hole.
- Stainless steel 304 locking nut is included.

 PATENTED 

SUNSHADE SOCKET RAIL MOUNT
Stainless Steel 316
- Sockets should be installed where supports meet the horizontal rail to
   ensure stability and prevent movement and turning underway. Sockets
   should be installed facing the outside of the boat.
- Designed with a 15° vertical angle combined with an outboard angle
   pointing away from the bow/stern to create a self-tensioning system.
- Fits 1-1/4" horizontal rail and 1" support rail.
- Self-draining design.

 PATENTED 

SUNSHADE POLE CLICK ADAPTER FOR ROD HOLDER 2"
Nylon & Stainless Steel 316
- Adapter fits easily into standard 2" rod holders, adding
   versatility to sunshade application.
- Excellent for fishing boats with limited installation space
   for standard sunshade sockets.
- Ball detent is included to make sure the pole stays in adapter.
- Coarse exterior for additional friction and security inside the
   rod holder.

- Provides constant torque throughout the entire range of motion.
- Holds door open at any desired angle without torque adjustment.
- Ideal for light-weight doors, such as overhead door, baitwell lid,
   glove box, interior door, anchor locker, electronic panel, etc.
- Passed 10,000 times cycle test and lost less than 10% on torque;
   20,000 times lost only 20% or less.
- Passed 500-hour salt-spray test.

- Piano-style hinge provides constant torque throughout the entire
   range of motion.
- Holds door open at any desired angle without torque adjustment.
- Designed to fit various door sizes including overhead door, baitwell
   lid, glove box, access door, interior door, anchor locker,
   electronic panel, hatch, etc.
- Short mounting leaves to fit 1/2" door thickness.
- Long mounting leaves to fit the radious of fiberglass door.
- Passed 10,000 times cycle test and lost less than 20% on torque;
   20,000 times lost 25% or less only.
- Passed 500-hour salt-spray test.

- Piano-style hinge provides constant torque throughout the entire
   range of motion.
- Holds door open at any desired angle without torque adjustment.
- Designed to fit various door sizes including overhead door, baitwell
   lid, glove box, access door, interior door, anchor locker, electronic
   panel, hatch, etc.
- Silicone caulking on cover is required.
- Passed 10,000 times cycle test and lost less than 20% on torque;
   20,000 times lost 25% or less only.
- Passed 500-hour salt-spray test.

- Modern shape and simplified two seam barrel design.
- The unique patented covers are built into the pivot for
   permanent use and concealing the screws.
- Push cover to snap in place. Can be unsnapped by using a
   small flat-head screwdriver.
- Fits different countersunk screw types.
- Silicone caulking on cover is required for specific application use.
- Passes 500 hours salt-spray test.
- If this hinge is mounted in the pocket, make sure to have enough
   room around the hinge leaves to allow the covers to be snapped down.