KUS USA

Davie,  FL 
United States
http://www.kus-usa.com
  • Booth: 3-1643

KUS is the world’s leading manufacturer and provider of liquid level sending products and solutions. KUS has more than 30 years of experience as ODM and OEM provider to global brands across the on-road/off-road vehicle, marine, industrial, and power generation industries. Recognized globally as the cost and quality leader for liquid level sending units, gauge instrumentation, and accessories for water, fuel, and diesel applications.


 Products

  • SSS/SSL Sender – SAE 5 Hole Pattern Mount
    Liquid Level Sender with American standard output (240 ohms at empty, 33 ohms at full)....

  • SSS/SSL Sender – SAE 5 Hole Pattern Mount

    The electric liquid level sending units are widely used in marine, on-road, off-road, generator set, and industrial applications. The electric liquid level sending unit utilizes reed switch and magnetic field technology. The advantage of reed switch type level sender over thick-film swing arm type level sender is the reed switch’s durability and reliability. Additionally, in reed switch level senders the float is the only moving part of the sender, thereby minimizing potential mechanical failures.

    Material:

    • Body: SUS 316 Stainless Steel
    • Cable: PVC
    • Float: NBR

    American Standard Output:

    • 4″ through 18.5″ at 0.5″ increments
    • 19″ through 96″ at 1″ increments

    Mounting Methods: Standard SAE 5 hole pattern

    Protection Rank: IP65

    Output Signal:

    • American Standard 240-33 ohms (240 ohms at empty , 33 ohms at full)
    • European Standard 0-180 ohms (0 ohms at empty, 180 ohms at full)
    • *Voltage output available upon request
    • *Current output available upon request
    • *Customized output curve available upon request

    Resolution Range:

    • 21mm
    • *Finer resolution (as low as 10mm) available upon request

    Operational Temperature: -40°F ~ +185°F (-40°C ~ +85°C)

  • S3U Sender – 1.25″ BSP mount
    Liquid Level Sender with American standard output (240 ohms at empty, 33 ohms at full)...

  • S3U Sender – 1.25″ BSP mount

    The electric liquid level sending units are widely used in marine, on-road, off-road, generator set, and industrial applications. The electric liquid level sending unit utilizes reed switch and magnetic field technology. The advantage of reed switch type level sender over thick-film swing arm type level sender is the reed switch’s durability and reliability. Additionally, in reed switch level senders the float is the only moving part of the sender, thereby minimizing potential mechanical failures.

    Material:

    • Body: SUS 316 Stainless Steel
    • Float: NBR
    • Cable: PVC

    Mounting Method: BSP 1.25″ threaded

    Protection Rating: IP 65

    Output Signal:*

    • American Standard 240-33 ohms (240 ohms at empty , 33 ohms at full)
    • European Standard 0-180 ohms (0 ohms at empty, 180 ohms at full)
    • *Voltage output available upon request
    • *Current output available upon request
    • *Customized output curve available upon request

    Resolution:*

    • 21mm
    • *Finer resolution (as low as 10mm) available upon request

    Operation Temperature: -40°F ~ +185°F (-40°C ~ +85°C)

    Operating Voltage: 12VDC or 24VDC system. The sender draws power through signal wire

    Rated Power Draw: 125mW

    Length:*

    • American Standard Output – 4″ through 96″ at 1″ increments
    • European Standard Output – 100mm through 2500mm at 50mm increment
  • S5U Sender – 1.5" NPT mount
    Liquid Level Sender with American standard output (240 ohms at empty, 33 ohms at full)....

  • S5U Sender – 1.5" NPT mount

    The electric liquid level sending units are widely used in marine, on-road, off-road, generator set, and industrial applications. The electric liquid level sending unit utilizes reed switch and magnetic field technology. The advantage of reed switch type level sender over thick-film swing arm type level sender is the reed switch’s durability and reliability. Additionally, in reed switch level senders the float is the only moving part of the sender, thereby minimizing potential mechanical failures.

    Material:

    • Body: SUS 316 Stainless Steel
    • Float: NBR
    • Cable: PVC

    Mounting Method: 1.5″ NPT (National Pipe Thread)

    Protection Rating: IP 65

    Output Signal:

    • American Standard 240-33 ohms (240 ohms at empty, 33 ohms at full)
    • European Standard 0-180 ohms (0 ohms at empty, 180 ohms at full)
    • Voltage (V) output available upon request
    • Current (mA) output available upon request
    • Customized output curve available upon request

    Resolution:

    • 21mm
    • Finer resolution (as low as 10mm) available upon request

    Operation Temperature: -40°F ~ +185°F (-40°C ~ +85°C)

    Operating Voltage: 12VDC or 24VDC system. The sender draws power through the signal wire

    Rated Power Draw: 125mW

    Length:

    • American Standard Output – 4″ through 96″ at 1″ increments
    • European Standard Output – 100mm through 2500mm at 50mm increment
  • Holding Tank Level Sender – SHS/SHST
    The Holding Tank Level Sender is used in mainly black or grey water tanks. Can also be used in freshwater tanks....

  • Holding Tank Level Sender – SHS/SHST

    Connector: Delphi, Tyco, or others are available according to customer’s requirements upon request

    IP Rating: IP 67

    Length Range: 4″, 6″, 8″, 12″, 16″, 18″, 20″, 22″, 24″, 28″, & 38″

    Custom lengths available upon request

    Material: SS316 Stainless Steel

    Max Current: 500mA

    Mounting: NPT 1 1/2″ thread twist-in, with standard 6 hole thread flange plate, standard 6 hole under ring and 6 piece of M5x30 screws

    Operating Temperature: -40°F ~ +185°F (-40°C ~ +85°C)

    Output Signal: 240-33Ω

    0 – 190Ω available upon request

    Rated Power: 125mW

    Resolution Range: 10~40mm

    Wire: PVC material (PA corrugated pipe cover is optional)

  • KMB-70
    The KMB-70 Series is an Integrated Data Monitor with an advanced TFT (Thin Film Transistor) screen. The KMB-70 displays real time network information including engine output, fluid levels, and speed....

  • KMB-70

    Monitoring Data

    • Engine: Speed, Trim, Coolant Water Temperature, Oil Pressure, Hours
    • Navigation: Course Over Ground (COG), Speed Over Ground (SOG)
    • Fluid Management: Fuel Level, Fresh Water Level, Black Water Level
    • Rudder Position and Battery Voltage

    Product Specifications

    • Model: KMB-70
    • Art No.: JKE00334
    • Dimension: 7.0 inches
    • Resolution: 800×480 pixels
    • Operation Voltage: 9-32V DC
    • Operation Current: 400mA (12V)
    • Operation Temp.: -20℃~+70℃/-4℉~158℉ (Touch screen: -20℃~+60℃/-4℉~140℉)
    • Cable Accessories: 1m length cable included.

    Key Features

    • 32-bit Cortex-M3 core + high-speed FPGA framework
    • Fast start-up speed
    • An Easy to use and switchable interface that supports multiple languages and datas
    • A Bright high-resolution screen display that can be seen in direct sunlight
    • Compatible with J1939 & NMEA 2000 including KUS Sea N series products
  • KMB-43
    The KMB-43 Series is an Integrated Data Monitor with an advanced TFT (Thin Film Transistor) screen. The KMB-43 displays real time network information including engine output, fluid levels, and speed....

  • KMB-43

    Monitoring Data

    • Engine: Speed, Trim, Coolant Water Temperature, Oil Pressure, Hours
    • Navigation: Course Over Ground(COG), Speed Over Ground(SOG)
    • Fluid Management: Fuel Level, Fresh Water Level, Black Water Level
    • Rudder Position and Battery Voltage

    Product Specifications

    • Model: KMB-43
    • Art No.: JKE00333
    • Dimension: 4.3 inches
    • Resolution: 480×272 pixels
    • Operation Voltage: 9-32V DC
    • Operation Current: 300mA (12V)
    • Operation Temp.: -20℃~+70℃/-4℉~158℉(Touch screen: -20℃~+60℃/-4℉~140℉)
    • Cable Accessories: 1m length cable included.

    Key Features

    • 32-bit Cortex-M3 core + high-speed FPGA framework
    • Fast start-up speed
    • An easy to use and switchable interface that supports multiple languages
    • A bright high-resolution screen display that can be seen in direct sunlight
    • Compatible with J1939 & NMEA2000 including KUS Sea N series products
  • KMG Gauge
    The KMG Touch/Button gauge is a multifunctional digital instrument developed for boats, yachts, and marine applications. The instrument integrates fuel level, oil pressure, tachometer, speedometer, and oil and water temperature all in one device....

  • KMG Gauge

    KMG Button

    Key Features

    • Two display styles option
      • Model 1: RPM(3K~8K), Fuel level, Engine temperature, Oil pressure, Engine work hours
      • Model 2: RPM(3K~8K), Fuel level, Engine temperature, Oil pressure, Engine work hours
    • Compatible with J1939 & NMEA2000, and supporting 4 different of Analog signals input ( Tacho sensor, Fuel, Water temperature and
      Oil pressure sensor )
    • For NMEA2000, the instance number need to be set up on the KMG
    • For Analog signal, optional scope can be set up by customer
      1. Fuel level ( 0~190ohm or 240~33ohm)
      2. Oil pressure ( 10~185ohm or customized)
      3. Water temperature ( 301~23ohm or customized)
      4. Speed ratio: (0.5-250.0)
    • Alarm Function : Fuel (10%), Water temperature (95℃/203℉), Oil pressure (0.7bar/10.15psi), can be customized
    • Backlight Brightness: 10%~100%
    • IP67 protection rating
    • Enjoy faster speed to start-up, low power consumption, and high frequency.

    Product Specification

    Model: KMG
    Art No.: JKE00520
    Dimension: 3.0 inches
    Mounting Dimension: 100mm
    Working Voltage: 9-32V DC
    Working Current: ≤170mA(12V)
    Resolution: 432×432 pixels
    Operation Method: Front Button (Up-Model-Down, 3 buttons to set up the function)
    Working Temperature: -30℃~+85℃(-22℉~185℉)
    Storage Temperature: -30℃~+85℃(-22℉~185℉)
    Accessories: 1M 5 cores CAN cable, 1M 6 cores Analog cable, manual.

    KMG Touch

    Key Features

    • Two display styles option
    • Model 1: Speed, COG, Voltage, Fuel level, Engine temperature, Oil pressure, Engine work hours
    • Model 2: RPM, Voltage, Fuel level, Engine temperature, Oil pressure, Engine work hours
      Compatible with J1939 & NMEA2000, and supporting 4 different of Analog signals input ( Tacho sensor, Fuel, Water temperature and
      Oil pressure sensor )
    • For NMEA2000, the instance number need to be set up on the KMG
    • For Analog signal, optional scope can be set up by customer
      1. Fuel level ( 0~190ohm, 240~33ohm or customized)
      2. Oil pressure ( 10~185ohm or customized)
      3. Water temperature ( 301~23ohm or customized)
      4. Speed ratio: (0.5-250.0)
    • Alarm Function : Fuel (10%), Water temperature (95℃/203℉), Oil pressure (0.7bar/10.15psi), can be customized
    • Backlight Brightness: 10%~100%
    • IP67 protection rating
    • Enjoy faster speed to start-up, Low power consumption, and high frequency.

    Product Specification

    Model: KMG
    Art No.: JKE00482
    Dimension: 3.0 inches
    Mounting Dimension: 97.5 mm
    Working Voltage: 9-32V DC
    Working Current: ≤170mA(12V)
    Resolution: 432×432 pixels
    Operation Method: Touch Screen
    Working Temperature: -30℃~+85℃/-22℉~185℉
    Storage Temperature: -30℃~+85℃/-22℉~185℉
    Accessories: 1M 5 cores CAN cable, 1M 6 cores Analog cable, manual.

  • NMEA Liquid Level Sender – NS5
    NS5 Liquid Level Sender is certified for the NMEA 2000 network. Can reset NS5 for different fluid types and instances on the NMEA 2000 network using the KUS setup tool....

  • NMEA Liquid Level Sender – NS5

    Material: Body SUS 316 Stainless Steel, Float NBR

    Mounting: SAE 5 hole pattern

    IP Rating: IP 67

    Signal output: NMEA 2000 Network message

    Resolution: Standard Resolution, 10-21mm

    Operating Temperature: -40°F ~ +185°F (-40°C ~ +85°C)

  • Bilge – OVG (Alarm)
    OVG is used for detecting the water level at the bottom of your boat. The housing, which can be conveniently disassembled and cleaned, prevents foreign particles from interfering with the float’s movement....

  • Bilge – OVG (Alarm)

    Connector: No

    Gasket: NBR

    Material: Body SUS 316 Stainless Steel

    Mounting: BSP 1 1/4″ Thread

    Unit Length: Standard Length is 4″ or 100mm

    Voltage: 24V/12V

    Wire Length: 3030mm

  • Bilge – PBK (Pump Switch)
    PBK used is for detecting water level at the bottom of the boat and can be used as a pump switch by manual operation. The housing, which can be disassembled and cleaned, prevents foreign particles from interfering with the float’s movement....

  • Bilge – PBK (Pump Switch)

    Connector: 12V, Yes 24V, No

    Gasket: NBR

    Material: Body SUS 316 Stainless Steel

    Mounting: BSP 1 1/4″ Thread

    Unit Length: Standard Length is 4″ or 100mm”

    Voltage: 12V or 24V

    Wire Length: 3030mm

  • Sea V Series
    Gauge bodies are IP67 rated with anti-fogging and scratch resistant lens cover; this means it can stand the harshest environment on the water. Dial face designs are back-lit by long lasting LED lights, making it easy to read at night....

  • Sea V Series

    Bezel:

    • SUS 316 Stainless Steel
    • Black Plastic
    • White Plastic

    Face Plate:

    • Black
    • White

    Mounting Dimension: 52mm, 2″ or 85mm 3 1/3"

    Protection Rating: IP 67

    Operating Voltage: 12V/24V

    Background Light:

    • Red
    • Yellow
    • LED Custom color available

    Connector: Multi-plug socket connection

    Movement: Cross coil motor movement

  • Sea N Series
    The Sea N series of gauges offers easy plug-and-play installation to the NMEA 2000 network while maintaining a clean classic design....

  • Sea N Series

    Bezel: SUS 316 Stainless Steel

    Face Plate:

    • Black
    • White

    Mounting Dimension: 52mm, 2″

    Protection Rating: IP 67

    Input Signal: NMEA 2000 & J1939

    Indicating Range: Empty – Full

    Operating Voltage: 12V/24V

    Background Light: Red LED

    Connector: Standard NMEA 2000 cable. 1 meter long

    Movement: Cross coil motor movement

  • Gauge Panel – CP7-B
    The CP7-B allows the user to monitor multiple tanks levels without the need of multiple gauges, thereby saving precious dashboard space. The CP7-B allows the user to toggle between and monitor up to seven tanks by press of a button....

  • Gauge Panel – CP7-B

    Protection Rating: IP 67

    Panel Size: 4″ H x 6-1/8″ W

    Indicating Range: Empty – Full

    Input Signal: 240 – 33Ω

    Operating Voltage: 12V/24V

    Input Signal: 240 – 33Ω

    Operating Voltage: 12V/24V

  • Gauge Panel – CP-2
    The CP-2 allows the user to monitor multiple tanks levels without the need of multiple gauges, thereby saving precious dashboard space. The CP-2 allows the user to toggle between and monitor two tanks by a flip of a switch....

  • Gauge Panel – CP-2

    Mounting Dimension: 100.5*79 mm

    Protection Rating: IP 67

    Panel Size: 3-15/16″ H x 3-1/16″

    Indicating Range: Empty – Full

    Input Signal: 240 – 33Ω

    Operating Voltage: 12V/24V

  • GPS Antenna
    GPS Antenna receives satellite signal and provides high-precision, real-time location information to the NMEA 2000 and/or J1939 network....

  • GPS Antenna

    NMEA 2000 Network: JKE00169

    J1939 Network: JKE00229

  • NJ/JN Gateway
    NJ gateway converts engine speed, oil pressure, temperature, and voltage data in the NMEA 2000 network into J1939 network. JN gateway converts engine speed, oil pressure, temperature, and voltage data in the J1939 network into NMEA 2000 network....

  • NJ/JN Gateway

    Features:

    • Easily installed, can use screw or ribbon to fix
    • Easy to use, don’t need extra setting
    • Standard Micro-C connector
    • Water proof level IP65

    Specifications:

    • Dimension: 93.8 x 39.6 x 32.3mm
    • Product Name: JN/JX200068 (J1939-NMEA2000)
    • NJ/JX200069 (NMEA2000-J1939)
    • Weight: 76g
    • Operating Voltage: 9~16V
    • Power Consumption: <50mA
    • Load Equivalence Number(LEN): 1
    • Operating Temperature: -30~+75°C
    • Storage Temperature: -40~+80°C
    • Protection Rating: IP65
  • NKC42 Network Converter
    The NKC42 is a universal adapter that allows one to connect the existing analog fuel, fresh water, waste water, live well, oil, black water sensors to the NMEA 20000 network....

  • NKC42 Network Converter

    Features:

    • NKC series attaches directly into J1939 and NMEA 2000 networks of comparable engines, transmissions and gen-sets and converts the signals to the NMEA 2000 or J1939 CAN bus data
    • J1939 & NMEA 2000 output for use with on board device
    • NKC series can be used to get engine data, tank levels, alarm status, generic pressure and temperature indications from any resistive sensors
    • Programmable sensor types including fuel, fresh water, waste water, live water, oil, and black water
    • Programmable sensor number up to 16 per sensor type
    • Adapts American standard (240~33 ohm) or European standard (0~190 khm) resistive sensors to NMEA 2000 network.
    • NMEA 2000 interface

    Specifications:

    • Item No.:
      • 1 Channel JKE00232
      • 4 Channels JKE00233
    • Dimension: NKC 70*Ø27mm
    • Protection Rating: IP67
    • Signal Output: NMEA 2000/J1939 Network Messages
    • Operating Voltage: 8~32V
    • Connector: Male “Micro-C” Pinout
    • Operation Temperature: -40°F ~ +185°F(-40°C~+85°C)
    • Mac Current: 50mA
  • NKC43 Network Converter
    The NKC43 is a universal adapter that allows one to connect the existing analog fuel, fresh water, waste water, live well, oil, black water sensors to the NMEA 20000 network....

  • NKC43 Network Converter

    Features:

    • NKC series attaches directly into J1939 and NMEA 2000 networks of comparable engines, transmissions and gen-sets and converts the signals to the NMEA 2000 or J1939 CAN bus data
    • J1939 & NMEA 2000 output for use with on board device
    • NKC series can be used to get engine data, tank levels, alarm status, generic pressure and temperature indications from any resistive sensors
    • Programmable sensor types including fuel, fresh water, waste water, live water, oil, and black water
    • Programmable sensor number up to 16 per sensor type
    • Adapts American standard (240~33 ohm) or European standard (0~190 khm) resistive sensors to NMEA 2000 network.
    • NMEA 2000 interface

    Specifications:

    • Item No.:
      • 1 Channel JKE00232
      • 4 Channels JKE00233
    • Dimension: NKC 70*Ø27mm
    • Protection Rating: IP67
    • Signal Output: NMEA 2000/J1939 Network Messages
    • Operating Voltage: 8~32V
    • Connector: Male “Micro-C” Pinout
    • Operation Temperature: -40°F ~ +185°F(-40°C~+85°C)
    • Mac Current: 50mA
  • NMEA 2000 Gateway
    NGW is a wireless signal converter that uses Bluetooth communication which sends real-time date of the engine. All the data is transmitted directly and showed on the app which is supported by Android and iOS....

  • NMEA 2000 Gateway

    Features:

    • Bluetooth communication, easy mount, and use of standard micro-accessible; no other outer equipment required
    • Support for Android or iOS
    • Three languages available: Chinese, English, and Spanish

    Specifications:

    • Materials: ABS. PC
    • Dimension: 79.4*4 0*21.5mm(including connector)
    • Working Voltage: 9-16V DC
    • Working Current: < 50mA
    • Bluetooth Frequency: 2.402GHz-2.480GHz
    • Effective Distance: 50m
    • Power Current: 45mA
    • Installation Way: Micro-C
    • Waterproof Standard: IP67

    Manual:

    Manual – NMEA 2000 Gateway

    *The effective distance can reach up to 50m in an open outdoor environment. The actual effective distance will vary depending on obstacles in the environment.

  • Setup Tool
    KUS Setup Tool for NMEA 2000 is used for the SEA N series gauge and NS5 series sensor....

  • Setup Tool

    KUS Sea N series gauges and level sensors have several configurable parameters, which are shown below including the default values. If you are not using the default values, you will need to use the set up tool to configure the gauge and level sensor.

    Gauge:

    • Fuel Level Meter/Water Level Meter/Holding Tank Meter
      • Tank Number (instance) – Default is tank 0
      • The gauge supports up to sixteen tanks (0~15)
    • Coolant Temperature Meter/Oil Pressure Meter
      • Engine Number (instance) – Default is engine 0
      • The gauge supports up to sixteen engines (0~15)

    Sensor:

    • Tank Type – Default is fuel. You can configure the sensor for any of these tank types: fuel, fresh water, waste water, level well, oil, or black water
    • Tank Number (instance) – Default is tank 0. The sensor supports up to sixteen tanks (0~15) for a given type of tank
    • Tank Capacity – Default is no tank capacity transmitted

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For Technical Support with this webpage, please contact support.