Marine Town Inc.

Crystal River,  FL 
United States
http://www.marinetown.com
  • Booth: 3-346

Marine Town's overseas facilities began producing stainless steel hardware for Orcas Marine Products in1995. This partnership led to an association with Southco as they expanded their line into the marine industry. It was through these relationships that Marine Town first established its presence in the US market. Wishing to serve our US customers more directly, our first US warehouse was established in Anacortes, Washington in 2011. Our dedication to providing customers with the most efficient service possible was the driving force behind our final transition four years later to the East Coast of Florida, where we operate today.
 
Our close relationship with Orcas Marine Products became the spark that ignited our passion for innovation. Over the years our team has collaborated with numerous builders to design new, leading edge marine hardware that redefined quality standards. We continue to utilize creative thinking to provide our ever-changing industry with the innovative, high quality products they deserve. 

We appreciate the opportunity to work with you and look forward to assisting you with all your hardward needs!
 


 Products

  • COVERED FRICTION HINGE
    Stainless Steel 316...

  • - Provides constant torque throughout the entire range of motion.
    - Holds door open at any desired angle without torque adjustment.
    - Ideal for light-weight doors, such as overhead door, baitwell lid,
      glove box, interior door, anchor locker, electronic panel, etc.
    - Silicone caulking on cover is required.
    - Passed 10,000 times cycle test and lost less than 10% on torque;
      20,000 times lost 20% or less only.
    - Passed 500-hour salt-spray test.
    - PVD finish is available upon request.

     
  • SUNSHADE SYSTEM
    Self-tensioning and free standing system is easy to set up, take down and store. It adapts well to a multitude of installation configurations. Sockets can be installed at any desired position for more complete coverage....

  • SUNSHADE POLE
    Fiberglass With Carbon Fiber & Stainless Steel 316
    - Quality carbon fiber finish on each pole.
    - Compatible with any customized canvas.
    Item No. : 0506851    Length  1215mm (47-13/16")
                     0506853    Length  1535mm (60-7/16")
                     0506855    Length  1845mm (72-5/8")


    SUNSHADE SOCKET W/CAP
    Stainless Steel 316
    - Designed with a 15° angle to create self-tensioning of poles,
      ensuring secure installment.
    - Anti-rattle design incorporates a rubber bushing under the
      cap hinge to ensure that the cap stays in the open or closed
      position underway.
    - Cap is designed to prevent water flowing directly into the socket.
      However, this socket is not self-draining and must be maintained
      to prevent corrosion and rusting that may result from sitting water.
    - Requires a 28mm (1-1/8") installation hole with a 15° angle.
    - U-shaped backing plate is included.
    Item No.: 0506865

    SUNSHADE SOCKET STUD TYPE

    Stainless Steel 316
    - Designed with a 15° angle to create self-tensioning of poles,
      ensuring secure installment.
    - Self-draining design incorporates a threaded barb for 1/2" draining hose.
    - Included seal gasket eliminates the need for caulking.
    - Wider backing cup distributes stress over a larger area when in use.
    - 0506867: Small face with low profile, ideal for boats with narrow gunnels.
      Requires a 28mm (1-1/8") installation hole with a 15° angle and notch hole.
    - 0806868: Wider flange provides better coverage of the installation hole.
      Requires a 35mm (1-3/8") installation hole and notch hole.
    Item No.: 0506867 & 0806868

    SUNSHADE SOCKET RAIL MOUNT

    Stainless Steel 316
    - Sockets should be installed where supports meet the horizontal rail to
      ensure stability and prevent movement and turning underway. Sockets
      should be installed facing the outside of the boat.
    - Designed with a 15° vertical angle combined with an outboard angle
      pointing away from the bow/stern to create a self-tensioning system.
    - Fits 1-1/4" horizontal rail and 1" support rail.
    - Self-draining design.
    - 1/4"-20 Allen screws are included.
    Item No: 0506861 & 0506863 

    SUNSHADE POLE CLICK ADAPTER
    FOR ROD HOLDER 2"

    Nylon & Stainless Steel 316
    - Adapter fits easily into standard 2" rod holders, adding
      versatility to sunshade application.
    - Excellent for fishing boats with limited installation space
      for standard sunshade sockets.
    - Ball detent is included to make sure the pole stays in adapter.
    - Coarse exterior for additional friction and security inside the
      rod holder.
    Item No.: 0706869



  • 1. GRAND SERIES - SLAM LATCH 1-3/8 / 1-3/4" / 2"
    Stainless Steel 316...

  • - Larger handle opening for comfortable grip.
    - Anti-rattle design incorporates double springs 
      to ensure quiet operation, even underway.
    - Reversible backing plate for wide range of door thickness.
    - Slam Latch 1-3/4" & 2": Adjustable slide accommodates
      minor adjustments following installation to ensure rattle-free operation.
    - Included gasket eliminates the need for caulking.

    - Installation screws are included.
    - PVD finish is available upon request
  • 2. GRAND SERIES- WATERPROOF SLAM LATCH
    Stainless Steel 316 & Nylon Housing...

  • - Designed for waterproof compartment.
    - Ideal for livewell lid on fishing boats.
    - Larger handle opening for comfortable grip.
    - Flush design for deluxe appearance.
    - Slide bolt is adjustable up to 6mm (1/4") to achieve easier engagement.
    - 3 mm spacer and #8 installation screws are included.
    - Strike screw size M4 or #8 (not included).
    - Padented. 

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For Technical Support with this webpage, please contact support.