Vico Plastics Inc.

Delafield,  WI 
United States
  • Booth: 3-345

Vico Plastics is a plastic injection molder specializing in the marine industry. We supply boat cover support & venting systems to boat manufactures, marine distributors, and canvas upholstery shops. Our Patented Boat Vent II, BV3 and Cam-Lock Support poles provide ventilation and tenting for mooring covers, travel covers, and storage covers.

Brands: Boatvent 2 Boatvent 3 Boat Vent 4 Boat Vent Aero Flex Support Boat Vent Shrink Cam-Lock Support Pole Pole support base assembly Ratchet tie down Hardware


  • Boat Vent 2
    Protect boat covers with an easy to install vent. The Boat Vent II helps prevents mold, mildew, and bacteria from growing under your cover, and causing irreversible damage to your boat's interior....

    • Standard in the boat cover industry

    • Easy to install (dealer & retail recommend

    • Easiest way to vent & tent your boat cover

    • Protects against snow loads or heavy rain vs. sew in vents (will not allow pole to rip or tear cover

    • Fast, easy fix for broken snaps or grommets

    • Center Seam Option

    • Size - 4.5"W x 4.5" D x 2.5" T

  • Boat Vent AERO
    One piece, louvered front, makes this vent durable and easy to install. Available in soft rubber, the vent will not mar or damage higher end wood boats or gel coats....

  • Great to use where tenting with the Boat Vent 2 or 3 may not be an option (i.e. cock pit cover, sail boat, heavy angles etc..). 

    The louver front can be used to help prevent bees or rodents from entering the cover or just extra protection from heavy rain. For maximum venting or use with the traditional cone look, you can also install without the front. 

    • Available in soft rubber or harder HDPE 

    • White or Black options

    • SMALL - Size With louver - 7.50" L x 5.125" W x 1.50" T

    • LARGE - Size - 10.75" L x 7.75" W x 2.00" T

  • Boat Vent 3
    Need more venting in your cover? The Boat Vent 3 is your perfect solution!...

  • Boat Vent 3 is an unique improvement over the Boat Vent II's venting, which made its name in the marine industry over the last two decades ago. The BV3 provides rougly 40% more venting while still tenting your boat cover, preventing mildew and mold. Molded from the highest UV inhibited plastic on the planet, it can be installed to virtually any boat cover. Its overhanging top allows in less moisture while 30 teeth on the washer provides a firm, secure grip for your cover.

    • No reinforcement piece needed

    • Installs in less than 15 seconds

    • Improved venting and grip

    • Center Seam Option (CS not available in retail)

    • Easiest, fastest way to vent & tent your boat cover

    • Protects against snow loads or heavy rain vs. sew in vents (will not allow pole to rip or tear cover

    • Only quick change, replaceable vent in the market

    • Size - 4.75" W x 4.75" D x 2.00" T

    • Available Colors:

  • Boat Vent 4 Sewable
    Vico Plastics is happy to introduce a new vent to its line up!...

  • The Boat Vent 4. Made from durable soft material, the vent is soft enough for sewing, but tough enough for the outdoor elements your boat cover will go through. For those who require a sew in style vent, this is your number one choice. Key features include screw-in style lead-in, removable top umbrella for easy access, and improved venting.

    • ​Twist & hold design for fast and easy sewing
    • Easy to remove top creates more efficient work area
    • Low profile design
    • Strong soft material with UV inhibitor
    • Matte Finish 
    • Inside hole fits 3/4” tube or Spline tip for improved fit
    • Can be installed with our without reinforcement piece
    • Size - 5" W x 5" D x 1.25" T
  • Boat Vent Shrink
    Fastest shrink wrap vent on the market...

  • The Boat Vent Shrink is the newest line up from Vico Marine. This vent is the fastest shrink wrap vent on the market. Designed with sharp teeth to help pierce the plastic, simply push down and twist. The body comes with weather resistant adhesive to last through heavy rain and winter.

    • New Two-Sided, Sharper Self piercing teeth 

    • Pre-installed adhesive to stick directly on shrink wrap cover

    • Easy to use 2 piece design.

    • Vent can be reused with new gasket material.

  • Single-Cam Cover Support Poles
    Boat Cover Support Poles...

  • Our telescoping cam lock support poles have die cast collars and stainless steel components, allowing them to hold a staggering 170 lbs; that is over twice the weight of standard thumbscrew mooring poles. The aluminum tubing is light weight, anodized, and heat treated to make sure it can withstand any climate, and with the added strength of a ribbed profile this pole is designed to last. Our poles come in a variety of sizes and tip options, including snap, swedge, plug, & spline.To protect your boats flooring from scuffs or marring, we use a synthetic TPE rubber crutch tip. Make sure to check out some of our NEW swivel pole bases for easier installation and use on upholstery.

    • Holds up to 170 lbs

    • Snap, swedge, plug, & spline

    • Silver Finished Anodized Aluminum

    • Ergonomic Cam-Lock for easy open and close

    • Sizes range from 70" extended to 28" (see chart)

    • 2-Tip poles available with snap & swedge tip installed

  • Rubber Flex Support
    Easy way to support your cover if venting is not required...

  • The flex support is an easy way to support your cover if venting is not required. The rubber sides are designed to "mushroom" down to match your cover's angle, dispersing the weight and protecting it from rips or tears. This is a great alternative to snap or swedge tips! 

    For professional shops - The support is made to sew directly into the cover. This will help keep the Flex Support in place, giving your customers an easy, fixed location to tent their cover.

    For consumers, this can also be used without sewing in place & is a quick easy alternative to snap or swedge tips. Simply attach it to the top of your support pole and firmly tent you cover. 

    • Fits up in to either 3/4" plug or spline tip pole

    • Durable tough rubber will not break or crack

    • Quick easy install

    • Can be either sewed in or just fit snuggly under the cover (optional) 

    • Best way to protect your boat cover top from rips or tears without venting. 

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".

For Technical Support with this webpage, please contact support.